Rear

TIGHTENING SPECIFICATIONS
Lower Control Arm:
Fulcrum Nut 80-100 Nm (59-74 ft. lbs.)
To Hub 90-110 Nm (60-81 ft. lbs.)
To Stabilizer Tie 39-51 Nm (29-38 ft. lbs.)
Lower Control Arm Tie:
To Monostrut 85-105 Nm (63-78 ft. lbs.)
Upper Link Assembly:
Differential End 85-105 Nm (63-78 ft. lbs.)
Crossmember End 85-115 Nm (63-85 ft. lbs.)