Centre Console Switch Module

1. Remove battery cover and disconnect ground cable from battery terminal. Service and Repair
2. Remove 'J' gate surround. Service and Repair
3. Remove centre console for access. Service and Repair
4. Remove radio console for access. Service and Repair







5. Disconnect switch module harness multiplug, release module end locaters and lightly press module out of console.

Installation
1. Fit switch module to console ensuring that end locaters are fully seated.
2. Connect switch module harness multiplug.
3. Fit radio console. Service and Repair
4. Fit centre console. Service and Repair
5. Fit 'J' gate surround. Service and Repair
6. Connect ground cable to battery terminal and fit battery cover. Service and Repair