Front Door Panel: Description and Operation

Door Trim And Water Shedder:

The doors are common to coupe and convertible and have dual seals and vacuum-formed water shedders with separate speaker curtains to provide internal insulation The door casings are trimmed in UEV with cloth or ambla center pads and integral pockets are attached to the inner panels by plastic studs and retainers and a large dowel. The top rolls are integral with the door casings and trimmed to match the upper fascia.

A leather trimmed armrest attached to each door casing by plastic fixings, is secured to the door by a screw passed through a pull cup into a bracket. An inset maple or burr walnut veneer switch pack is held in position by a single screw and captive nut.