Issue 2 - Replacing EGR Valve

1. Open the hood and place covers over the fenders.





2. Disconnect the EGR valve harness connector (Illustration 8).

3. Remove the EGR valve securing bolts.

4. Remove the EGR valve and valve gasket.

5. Clean the valve mating faces.

6. To reinstall the new EGR valve and gasket, reverse the EGR valve removal process.

Note:
Care must be taken not to damage the EGR valve securing bolts. Torque figure: 23-27 Nm (17-20 lb ft).

7. Continue with the procedure for replacing the throttle spring.