Intake Manifold: Specifications
| Blanking Plate to Intake Manifold (in place of adapter) | 9.5 - 12.5 |
| EGR Adapter to Intake Manifold | 9.5 - 12.5 |
| EGR Pipe to Adapter | 36 - 44 |
| EGR Sensor to Intake Manifold | 14.5 - 19.5 |
| Intake Manifold Steady Screw | 22 - 28 |
| Intake Manifold to Cylinder Head | 21.5 - 28.5 |
| Pedestal to Throttle Body | 9.5 - 12.5 |
| Pressure Regulator to Intake Manifold | 5 - 7 |
| Purge Adapter to Intake Manifold | 9.5 - 12.5 |
| Throttle Body to Intake Manifold | 21.5 - 28.5 |
| Throttle Cable Abutment to Intake Manifold | 9.5 - 12.5 |
| Throttle Linkage Actuator Nut | 1.8 - 2.2 |
| Throttle Linkage Baseplate to Pedestal | 9.5 - 12.5 |
| Throttle Spindle Assembly Nut | 3.5 - 4.5 |
| Throttle Stop Screw Locknut | 4.3 - 5.7 |