Power Seat Switch Assembly

Power Seat Switch Assembly Fig. 1:

All vehicles are equipped with two switch assemblies which are clipped in outboard positions of driver's and front passenger seats. The assembly for vehicles fitted with non-manual seats comprises three switches which control the following movements:
- Forward/rearward seat movement (3 Fig. 1).
- Forward/rearward squab movement (1 Fig. 1).
- Front and rear cushion movement (3 Fig. 2).
- Up/down headrest movement (1 Fig. 1).
- Inflation/deflation of lumbar cushion (2 Fig. 1).

On cars equipped with manual seats, a seat height switch pack assembly accommodating a single switch is fitted only on the driver's seat in a similar position as the switch item 3 Fig. 1.


NOTE: Note orientation of switch pack assembly and remove carefully.