Seat Movement Motor (Manual Seats)

2B.
a. Check motor operation is not obstructed, and that mechanical linkage is not damaged or disconnected.
b. Check continuity from motor connector pins (1 & 3) to each relay contact connector (pin 3, raise relay, pin 8, lower relay) respectively.
c. Check power supply (+12 V) from LH heelboard fuse box, fuse F6, to seat switch connector pin 9.
d. Check power supply (+12 V) from RH heelboard fuse box, fuse F3, to pin 5, raise relay connector and pin 10, lower relay connector.
e. Check continuity from switch pack connector pin 4 to raise relay connector pin 5 and from switch pack connector pin 5 to lower relay connector pin 6
f. Check continuity to ground from raise relay connector pins 2 and 4 and lower relay connector pins 7 and 9