Transmission Speed Sensor: Service and Repair

TRANSMISSION SPEED SENSOR, RENEW

- Raise the hood and fit a fender cover.

- Raise the vehicle on a ramp.

- Drain the transmission lubrication system.

- Remove the fluid pan.

- Displace the transmission speed sensor harness from the valve body rear securing clip.

- Release and remove the speed sensor and connector retaining clip from the valve body.

- Displace the speed sensor and connector from the transmission main casing.

- Disconnect and remove the speed sensor from the harness connector.

- Clean the speed sensor, retaining clip and mating surface.

- Connect the new speed sensor to the harness connector.

- Fully seat the speed sensor into the transmission unit main casing.

- Fit the speed sensor and connector retaining clip to the valve body, engaging the tangs onto the connector.

- Fit and tighten the speed sensor and connector retaining clip securing screws.

- Reposition and fully seat the speed sensor harness into the valve body rear; secure the clip.

- Refit the fluid pan.

- Lower the vehicle on the ramp.

- Refill the transmission unit with fluid.

- Remove the fender cover and lower the hood.