Drive Cycle

To enable the AMFR adaption and/or FMFR adaption to reset, the following preconditions must first be obtained:

^ Air intake temperature must be between, 10 deg C and 55 deg C.

^ Engine coolant temperature must be between, 80 deg C and 100 deg C. Illustration 1 shows a view of the PDU screen in bar chart form with the relevant conditions and typical values for an engine in good fuelling order.

Note:
Where values are less than 1 kg/hr, the PDU display will show the values as g/hr, for example, 500 g/hr rather than 0.5 Kg/ hr. (Illustration 1).