Fastener Tightening Specifications

Solenoid to Valve Body 8 Nm (71 inch lbs.)
Control Valve Assembly to Case 11 Nm (97 inch lbs.)
Oil Test Hole Plug 11 Nm (97 inch lbs.)
Flywheel Housing Cover to Transmission 7 Nm (62 inch lbs.)
Pump Body to Cover 24 Nm (18 ft. lbs.)
Pump Assembly to Case 24 Nm (18 ft. lbs.)
Rear Servo Cover to Case 24 Nm (18 ft. lbs.)
Pressure Control Solenoid Bracket to Valve Body 8 Nm (71 inch lbs.)
Parking Pawl Bracket to Case 24 Nm (18 ft. lbs.)
Accumulator Housing to Valve Body 11 Nm (97 inch lbs.)
Fourth Clutch 23 Nm (17 ft. lbs.)
Oil Pan to Case 24 Nm (18 ft. lbs.)
Extension Housing to Case 34 Nm (25 ft. lbs.)
Manual Shaft to Detent Lever Nut 24 Nm (18 ft. lbs.)
Speed Sensor and Bracket Assembly to Case 11 Nm (97 inch lbs.)
Case Center Support 44 Nm (32 ft. lbs.)
Flywheel to Converter 44 Nm (32 ft. lbs.)
Transmission Case to Engine 44 Nm (33 ft. lbs.)
Cooler Pipe Connector Nut at Case and Radiator 38 Nm (28 ft. lbs.)
Valve Body to Case/Lube Pipe 11 Nm (97 inch lbs.)
Engine Rear Mount to Transmission Bolt 44 Nm (32 ft. lbs.)
Engine Rear Support Bracket to Frame Nut 44 Nm (32 ft. lbs.)
Valve Body to Case/PSM 11 Nm (97 inch lbs.)
Drain Plug, Oil Pan 34 Nm (25 ft. lbs.)