Clearing Diagnostic Trouble Codes

Disconnecting battery ground cable will clear fault codes but will also erase radio memory and radio security code. To recode radio, locate radio code under hood and follow instructions in owners manual.

As new electronic engine management systems are developed and incorporated into its vehicles, Jaguar issues appropriate information and test equipment to its dealers. The computerized test system currently in use is named Jaguar Diagnostic System (JDS). Unfortunately, detailed test information and proprietary test equipment are not readily available to independent repair facilities.

Because the information Jaguar does release, even in shop manuals, is incomplete at best, aftermarket sources tend to be similarly lacking. The same situation prevails with test equipment specifically designed to interface with Jaguar electronic systems.

Due to the lack of adequate information and test equipment, independent shop technicians faced with Jaguar engine management faults may encounter unusually difficult troubleshooting problems. Knowledge of vehicles with similar (Bosch based) systems could be an important factor when attempting to diagnose and repair Jaguar cars. In some cases, there may be no choice but referral to a Jaguar dealer.