Oil Pressure Warning Switch

OIL PRESSURE WARNING LIGHT SWITCH

Fig 1:

Fig 3:

RENEW

Open the bonnet.
Disconnect the battery earth lead.
Disconnect the switch feed wire.
Unscrew and remove the switch (Fig. 1 - 6 cyl. engine: Fig. 3 - 12 cyl. engine).
Fit and tighten the new switch.
Reconnect the switch feed wire.
Reconnect the battery earth lead.
Close the bonnet.


DATA

TORQUE FIGURES
Switch to engine - 20-27 Nm

SPANNER SIZES
18 mm