Torque Converter: Service and Repair

Flywheel to Torque Converter Bolts

Removal Procedure

1. Raise the vehicle.
2. Remove the starter.




3. Remove the converter housing access plug.
4. Mark the converter and flywheel for proper alignment for installation.




5. Remove the flywheel to converter bolts.

Installation Procedure




1. Install the flywheel to converter bolts. Hand start the bolts.
Tighten
Tighten the bolts to 60 N.m (44 lb ft).




2. Install the converter housing access plug.
3. Lower the vehicle.