FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Mode Actuator

Mode Actuator Replacement

Removal Procedure
The mode valve actuator is located on the bottom front corner of the heater module.
1. Remove the left side instrument panel sound insulator.
2. Remove the knee bolster.
3. Remove the center instrument panel sound insulator.




4. Depress the retaining clip in order to remove the vacuum connectors from the mode valve.




5. Remove the mode valve from the heater module.

Installation Procedure




1. Install the mode valve to the heater module.




2. Install the vacuum connectors to the mode valve. Ensure that the retaining clip locks into place.
3. Install the center instrument panel sound insulator.
4. Install the knee bolster.
5. Install the left side instrument panel sound insulator.