FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu Truck >> 1999 >> Hombre XS Space Cab 2WD V6-4.3L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Engine Accessory Bracket >> Service and Repair >> Generator Bracket

Generator Bracket

Accessory Mounting Brackets Replacement (Generator Bracket)

Removal Procedure




1. Disconnect the battery negative cable.
2. Remove the engine cooling fan.
3. Remove the drive belt.
4. Remove the generator.
5. Remove the engine wiring harness bracket from the generator mounting bracket.
6. Remove the drive belt tensioner.
7. Remove the drive belt idler pulley.




8. Remove the three bolts and nut holding the generator mounting bracket to the engine.
9. Slide the generator mounting bracket off of the stud.

Installation Procedure




1. Slide the generator mounting bracket onto the stud.
2. Install the two generator mounting bracket bolts and the nut.
Tighten the generator mounting bracket bolts and nut to 41 N.m (30 lb ft).
3. Install the drive belt idler pulley.
4. Install the drive belt tensioner.




5. Install the engine wiring harness bracket to the generator mounting bracket.
Tighten the engine wiring harness bracket bolt to 25 N.m (18 lb ft).
6. Install the generator.
7. Install the drive belt.
8. Install the engine cooling fan.
9. Connect the battery negative cable.
pro multis Credits:Operation CHARM About Operation CHARM