Speaker Replacement - Rear
Removal Procedure1. Remove the rear Body side trim panel.
- Trim Panel Replacement - Body Side (Standard Cab)
- Trim Panel Replacement - Body Side (Extended Cab)
2. Disconnect the electrical connectors, as necessary.
3. Remove the radio rear speaker nuts.
4. Remove the rear speaker from the rear Body side trim panel.
Installation Procedure
1. Install the radio rear speaker to the rear Body side trim panel.
NOTE: Refer to Fastener Note in Service Precautions.
2. Install the radio rear speaker nuts.
Tighten
Tighten the radio rear speaker nuts to 1.2 N.m (11 lb in).
3. Connect the electrical connectors, as necessary.
4. Install the rear Body side trim panel.
- Trim Panel Replacement - Body Side (Standard Cab)
- Trim Panel Replacement - Body Side (Extended Cab)
5. Inspect for proper circuit operation.