Antenna Mast: Service and Repair

Removal Procedure

IMPORTANT: Use tape on the tool surface to protect the paint on the antenna mast from damage.




1. Unscrew the antenna mast.




2. Remove the antenna mast from the antenna base.

Installation Procedure

IMPORTANT: Use tape on the tool surface to protect the paint on the antenna mast from damage.




1. Install the antenna mast to the antenna base.

NOTE: Refer to Fastener Note in Service Precautions.




2. Screw the antenna mast to the antenna base.

Tighten
Tighten the antenna mast to 5 N.m (44 lb in).