Front Crankshaft Seal: Service and Repair

1. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
2. Disconnect battery ground cable.
3. Remove timing belt. Then remove crankshaft pulley hub.
4. Using care not to damage crankshaft or seal housing, pry out seal using a suitable tool.
5. Reverse procedure to install, noting the following:
a. Lubricate sealing lips of new seal before installing.
b. Use seal driver tool No. J-35269, or equivalent to install new seal.
c. Tighten bolts to specification.
1. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.