Accumulator Piston

3-4 ACCUMULATOR PISTON
DISASSEMBLY
. Snap ring (Fig. 7A-80)
^ Install cover compressor on adapter case. Compress piston cover. Remove snap ring.
Compressor: J-38559






2. Cover (Fig. 7A-81)
^ Install cover remover to center hole of cover. Use slide hammer to remove cover.
Cover remove J-38552
Adapter: J-38584
Slide hammer : J-23907






3. Spring
4. Piston

INSPECTION AND REPAIR
Visual Check
^ If any damage, deformation or wear is found in a return spring, piston or piston cover, replace it

REASSEMBLY
4. Piston (Fig. 7A-82)
^ Place the fitter into adaptor case and push the piston into position, using suitable diameter tube.
Piston fitter: J-38553






3. Spring
2. Cover (Fig. 7A-83)
^ Install cover, using compressor tool. Compressor: J-38559






1. Snap ring
^ Install snap ring in groove.