Removal and Installation

FRONT OIL SEAL

Removal and Installation


REMOVAL

1.Remove the drain plug to drain the transfer fluid. Refer to "Draining" Draining.
2.Remove the front propeller shaft. Refer to "Exploded View" Exploded View.
3.Remove front oil seal.

CAUTION:
Never damage the front case and front drive shaft.

INSTALLATION






1.Apply transfer fluid to outside of front oil seal, install it with a drift (A) [SST: ST27862000 (-)] until the end face of front case.

CAUTION:
- Never reuse front oil seal.
- Apply petroleum jelly to oil seal lip.
- When installing, never incline front oil seal.
2.Install front propeller shaft. Refer to "Exploded View" Exploded View.
3.Fill with new transfer fluid, check fluid level and for fluid leakage.
Refer to "Inspection" Removal and Replacement.