Refilling

TRANSFER FLUID

Refilling






1.Remove filler plug (1) and gasket. Then fill fluid up to mounting hole for the filler plug.
Fluid and viscosity: Refer to {LINK_TO_MANY:0000000008160216}{LINK_TO_MANY:0000000008160217}, "FOR


NORTH AMERICA : Fluids
and Lubricants" (For North
America), {LINK_TO_MANY:0000000008160218}{LINK_TO_MANY:0000000008160219}, "FOR
MEXICO : Fluids and Lubricants" (For Mexico).
Fluid capacity: Refer to "General Specifications" Mechanical Specifications.

CAUTION:
Carefully fill the fluid. (Fill up for approximately 3 minutes.)
2.Leave the vehicle for 3 minutes, and check the fluid level again.
3.Set a new gasket onto filler plug, and install it on transfer and tighten to the specified torque. Refer to
"Exploded View" Exploded View.

CAUTION:
Never reuse gasket.