Refilling

REAR DIFFERENTIAL GEAR OIL

Refilling






1.Remove filler plug (1). Fill with new gear oil until oil level reaches the specified level near filler plug mounting hole.
Oil grade and viscosity: Refer to {LINK_TO_MANY:0000000008160216}{LINK_TO_MANY:0000000008160217}, "FOR


NORTH AMERICA : Fluids
and Lubricants" (For North
America), {LINK_TO_MANY:0000000008160218}{LINK_TO_MANY:0000000008160219}, "FOR
MEXICO : Fluids and Lubricants" (For Mexico).
Oil capacity: Refer to "General Specification" General Specification.
2.After refilling oil, check oil level. Set a gasket to filler plug, then install it to final drive assembly. Refer to
"2WD : Exploded View" Exploded View (2WD), "AWD : Exploded View" Exploded View (AWD).

CAUTION:
Never reuse gasket.