Removal and Installation

FLOOR TRIM

Removal and Installation


REMOVAL

1.Remove front seat assembly (LH/RH). Refer to "Removal and Installation" Removal and Installation.
2.Remove rear seat cushion. Refer to "Removal and Installation" Removal and Installation.
3.Remove accelerator pedal pad. Refer to "Removal and Installation" Removal and Installation.





4.Disengage clip of floor hook (1) using a remover tool (A).





5.Remove foot grille. Refer to "FOOT GRILLE : Removal and Installation" Foot Grille.
6.Remove front seat belt floor anchor bolt (LH/RH). Refer to "SEAT BELT BUCKLE : Exploded View" Exploded View.
7.Remove center console assembly.
Refer to "A/T MODELS : Removal and Installation" Removal and Installation (A/T models).
Refer to "M/T MODELS : Removal and Installation" Removal and Installation (M/T models).
8.Remove instrument lower cover, instrument driver panel, instrument assist lower panel and instrument side panel (LH/RH).
Refer to "A/T MODELS : Exploded View" Exploded View A/T Models (A/T models).
Refer to "M/T MODELS : Removal and Installation" Removal and Installation M/T Models (M/T models).
9.Remove YAW RATE/G-SENSOR (1).





Refer to "Removal and Installation" Removal and Installation.
10.Remove diagnosis sensor unit (2).
Refer to "Removal and Installation" Removal and Installation.
11.Remove console rear bracket (3).
Refer to "A/T MODELS : Removal and Installation" Removal and Installation (A/T
models).
Refer to "M/T MODELS : Removal and Installation" Removal and Installation (M/T
models).
12.Remove floor harness fixing clamps (A).
13.Remove dash side finisher (LH/RH), front kicking plate inner (LH/RH) and body side welt (LH/RH).
Refer to "Removal and Installation" Removal and Installation.
14.Remove floor trim fixing clips and fixing nuts.





15.Remove floor trim from floor trim fixing clips (A) and remove floor carpet (1).

INSTALLATION

Install in the reverse order of removal.