Removal and Installation

UPPER LINK

Removal and Installation


REMOVAL

1.Remove tires with power tool. Refer to "Exploded View" Exploded View.
2.Remove shock absorber assembly. Refer to "Exploded View" Exploded View.
3.Remove upper link from steering knuckle. Refer to "Exploded View" Exploded View.
4.Remove upper link and stopper rubber.

INSTALLATION

Note the following, and install in the reverse order of removal.
- Perform final tightening of bolts and nuts at the vehicle installation position (rubber bushing), under unladen conditions with tires on level ground.