Removal and Installation

TILT&TELESCOPIC SWITCH

Removal and Installation


REMOVAL


CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.Remove steering column mask (1). Refer to "A/T MODELS : Removal and Installation" Removal and Installation A/T Models (A/T models) or "M/T MODELS : Removal and Installation" Removal and Installation M/T Models (M/T models).





2.Press pawls and remove tilt & telescopic switch (2) from steering column mask (1).






INSTALLATION

Install in reverse order of removal.

CAUTION:
Be sure to clump the harness to the right place.