Seat Belt Warning Lamp Does Not Turn On

SEAT BELT WARNING LAMP DOES NOT TURN ON

Diagnosis Procedure


1. CHECK SELF-DIAGNOSIS RESULT

Perform "COMBINATION METER" self-diagnostic result. Refer to "DTC Index" Testing and Inspection
Is DTC detected?
YES- Repair or replace the malfunctioning parts.
NO- GO TO 2.

2. CHECK POWER SUPPLY

Check that fuses are not blown.
Check ignition power supply of combination meter. Refer to "Diagnosis Procedure" Power Supply and Ground Circuit
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the malfunctioning parts.

3. CHECK SEAT BELT BUCKLE SWITCH (DRIVER SIDE)

Check seat belt buckle switch (driver side). Refer to "DRIVER SIDE : Component Function Check" Component Function Check
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace the malfunctioning parts.

4. .CHECK SEAT BELT BUCKLE SWITCH (PASSENGER SIDE)

Check seat belt buckle switch (passenger side). Refer to "PASSENGER SIDE : Component Function Check" Component Function Check
Is the inspection result normal?
YES- GO TO 5.
NO- Repair or replace the malfunctioning parts.

5. .CHECK SEAT BELT WARNING LAMP CIRCUIT

Check seat belt warning lamp circuit. Refer to "Diagnosis Procedure" Seat Belt Warning Lamp Circuit
Is the inspection result normal?
YES- GO TO 6.
NO- Repair or replace the malfunctioning parts.

6. CONFIRM THE OPERATION

Confirm the operation again.
Is the inspection result normal?
YES- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.
NO- GO TO 1.