Automatic Drive Positioner

DRIVER SEAT CONTROL UNIT

Removal and Installation


REMOVAL


CAUTION:
When removing and installing, use shop cloths to protect parts from damage.





1.Remove driver seat (1). Refer to "Removal and Installation" Removal and Installation.
2.Remove mounting bolts (A).
3.Remove driver seat control unit (2).

INSTALLATION

Install in reverse order of removal.

CAUTION:
Be sure to clump the harness to the right place.
NOTE:
After installing driver seat, perform additional service when replacing control unit. Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement" Special Repair Requirement.