Base Audio

CONFIGURATION (AV CONTROL UNIT)

Work Procedure


1. WRITE VEHICLE SPECIFICATION

CONSULT Configuration
Write vehicle specification into AV control unit.
To write vehicle specification stored in CONSULT into the AV control unit-GO TO 2.
To write vehicle specification into the AV control unit by hand-GO TO 3.

2. WRITE STORED DATA

CONSULT Configuration
Select "After Replace ECU" in "Read/Write Configuration." Write data stored in CONSULT with the "Before
Replace ECU" function into the AV control unit.
- GO TO 4.

3. MANUALLY WRITE VEHICLE SPECIFICATION

CONSULT Configuration
Perform "Manual Configuration." Refer to the Configuration List to write vehicle specification into the AV control unit. Refer to "Configuration List" Base Audio.
NOTE:
If selection items are not displayed on the CONSULT screen, touch "NEXT."
- GO TO 4.

4. OPERATION CHECK

Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course lines) are normal.
- WORK END