Special Repair Requirement

INSPECTION AND ADJUSTMENT

THROTTLE VALVE CLOSED POSITION LEARNING : Special Repair Requirement


1. START

WITH CONSULT
1.Turn ignition switch ON.
2.Select "CLSD THL POS LEARN" in "WORK SUPPORT" mode.
3.Follow the instructions on the CONSULT display.
4.Turn ignition switch OFF and wait at least 10 seconds.
Check that throttle valve moves during the above 10 seconds by confirming the operating sound.
WITHOUT CONSULT
1.Start the engine.
NOTE:
Engine coolant temperature is 25�C (77�F) or less before engine starts.
2.Warm up the engine.
NOTE:
Raise engine coolant temperature until it reaches 65�C (149�F) or more.
3.Turn ignition switch OFF and wait at least 10 seconds.
Check that throttle valve moves during the above 10 seconds by confirming the operating sound.
- END