Removal and Installation

POWER SOCKET

CONSOLE POWER SOCKET : Removal and Installation


REMOVAL

1.Remove center console assembly. Refer to "A/T MODELS : Exploded View" Exploded View (A/T models) or "M/T MODELS : Exploded View" Exploded View (M/T models).





2.Disconnect power socket connector (A).





3.Pull out inner socket (2) by pushing the ring pawl (B) from the inner socket hole (square) (D).
4.Remove ring (1) from console box while pressing pawls.

INSTALLATION

Install in the reverse order of removal.
NOTE:
Align the cut outs of inner socket and ring.