Replacement

CIGARETTE LIGHTER ILLUMINATION

Replacement


CAUTION:
- Disconnect the battery negative terminal or remove the fuse.
- Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
- Never touch bulb by hand while it is lit or right after being turned off.
- Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.

CIGARETTE LIGHTER ILLUMINATION BULB

1.Remove the console finisher.
Refer to "A/T MODELS : Removal and Installation" Removal and Installation. (A/T models)
Refer to "M/T MODELS : Removal and Installation" Removal and Installation. (M/T models)
2.Insert any appropriate tool into the gap of the bulb socket. Widen the hook and remove the bulb socket.
3.Remove the bulb.