Removal and Installation

TIRE PRESSURE RECEIVER

Removal and Installation


REMOVAL

1.Remove the glove box assembly. Refer to "A/T MODELS : Exploded View" Exploded View A/T Models (A/T) or "M/T
MODELS : Exploded View" (M/T).
2.Remove the instrument lower panel RH. Refer to "A/T MODELS : Exploded View" Exploded View A/T Models (A/T) or "M/T MODELS : Exploded View" Exploded View M/T Models (M/T).
3.Disconnect tire pressure receiver harness connector.
4.Remove tire pressure receiver mounting screw.
5.Remove tire pressure receiver.

INSTALLATION

Install is the reverse order of removal.