Take Away Warning Does Not Operate
TAKE AWAY WARNING DOES NOT OPERATE
Diagnosis Procedure
1. CHECK POWER POSITION
Check if ignition switch position is changing or not.
Does ignition switch position change?
YES- GO TO 2.
NO- Check BCM for DTC. Refer to "DTC Index" Testing and Inspection.
2. CHECK DOOR SWITCH
Check door switch.
Refer to "Component Function Check" Door Switch.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the malfunctioning parts.
3. CHECK KEY SLOT
Check key slot.
Refer to "Component Function Check" Key Slot.
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace the malfunctioning parts.
4. CHECK INSIDE KEY ANTENNA
Check inside key antenna.
- Instrument center: Refer to "DTC Logic" B2621.
- Console: Refer to "DTC Logic" B2622.
- Trunk room: Refer to "DTC Logic" B2623.
Is the inspection result normal?
YES- GO TO 5.
NO- Repair or replace the malfunctioning parts.
5. CHECK BUZZER (COMBINATION METER)
Check buzzer (combination meter).
Refer to "Component Function Check" Buzzer (Combination Meter).
Is the inspection result normal?
YES- GO TO 6.
NO- Repair or replace the malfunctioning parts.
6. CHECK COMBINATION METER DISPLAY FUNCTION
Check combination meter display function.
Refer to "Component Function Check" Combination Meter Display Function.
Is the inspection result normal?
YES- GO TO 7.
NO- Repair or replace the malfunctioning parts.
7. CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
Refer to "Component Function Check" Intelligent Key Warning Buzzer.
Is the inspection result normal?
YES- GO TO 8.
NO- Repair or replace the malfunctioning parts.
8. CHECK KEY SLOT INDICATOR
Check key slot indicator.
Refer to "Component Function Check" Key Slot Indicator.
Is the inspection result normal?
YES- GO TO 9.
NO- Repair or replace the malfunctioning parts.
9. CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.
NO- GO TO 1.