Removal and Installation

CLOCK

Removal and Installation


REMOVAL

1.Remove cluster lid C assembly. Refer to "A/T MODELS : Removal and Installation" Removal and Installation A/T Models (A/T models) or
"M/T MODELS : Removal and Installation" Removal and Installation M/T Models (M/T models).





2.Remove screws (A), (B), (C) and remove clock (1) in conjunction with preset switch (2) from cluster lid C.
3.Disengage the tabs to separate clock.

INSTALLATION

Install in the reverse order of removal.
NOTE:
Never confuse screws when installing.