Removal and Installation

UNIFIED METER AND A/C AMP.

Removal and Installation


REMOVAL

1.Remove AV control unit. Refer to the following.
- Refer to "Exploded View" Base Audio. (BASE AUDIO WITHOUT NAVIGATION)
- Refer to "Exploded View" Without Navigation. (BOSE AUDIO WITHOUT NAVIGATION)
- Refer to "Exploded View" With Navigation. (BOSE AUDIO WITH NAVIGATION)
2.Remove fixing screws, and then remove unified meter and A/C amp..

INSTALLATION

Note the following item, and then install in the reverse order of removal.

CAUTION:
Since unified meter and A/C amp. connector and AV control unit connector have the same form, be careful not to insert them wrongly.