Timing Cover: Specifications

Front timing chain case





Tighten mounting bolts to the specified torque in numerical order as shown in the figure.

There are two types of mounting bolts. Refer to the following for locating bolts.

M10 bolts: 1, 2, 3, 4, 5, 6, 7
Tighten 55.0 Nm (5.6 kg-m, 41 ft-lb)

M6 bolts: Except the above
Tighten 12.7 Nm (1.3 kg-m, 9 ft-lb)

After all bolts are tightened, retighten them to the specified torque in numerical order shown in the figure.

Rear timing chain case





Tighten mounting bolts in numerical order as shown in the figure.

There are three types of mounting bolts. Refer to the following for locating bolts.





After all bolts are tightened, retighten them to the specified torque in numerical order shown in the figure.