Removal and Installation

OIL PUMP

Removal and Installation


REMOVAL

1.Remove oil pan (upper and lower) and oil strainer. Refer to "Exploded View" Exploded View and "Exploded View" Exploded View.
2.Remove front timing chain case and timing chain (primary). Refer to "Exploded View" Exploded View.
3.Remove oil pump assembly.

INSTALLATION


CAUTION:
Before installation, apply new engine oil to the parts as instructed in the figure.
Note the following, and install in the reverse order of removal.
- When installing, align crankshaft flat faces with oil pump inner rotor flat faces.