Removal and Installation

ICC SENSOR INTEGRATED UNIT

Removal and Installation


REMOVAL

1.Remove front bumper fascia. Refer to "Removal and Installation" Removal and Installation.
2.Disconnect ICC sensor integrated unit connector.
3.Remove mounting bolts from ICC sensor integrated unit.
4.Remove ICC sensor integrated unit.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
Always perform the laser beam aiming adjustment and check the operation after the replacement, removal, and installation of ICC sensor integrated unit. Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (ICC SENSOR INTEGRATED UNIT) : Description" Description.