Removal and Installation

YAW RATE/SIDE G SENSOR

Removal and Installation


REMOVAL


CAUTION:
- Never drop or strike yaw rate/side G sensor, or never use power tool etc., because yaw rate/side G
sensor is sensitive to the impact.
1.Remove center console. Refer to "A/T MODELS : Exploded View" Exploded View (A/T), "M/T MODELS :
Exploded View" (M/T).
2.Disconnect yaw rate/side G sensor harness connector.
3.Remove mounting bolts. Remove yaw rate/side G sensor.

INSTALLATION

Note the following, and install in the reverse order of removal.
- Never drop or strike yaw rate/side G sensor, or never use power tool etc., because yaw rate/side G sensor is sensitive to the impact.