Passenger Side

POWER SEAT SWITCH GROUND CIRCUIT

PASSENGER SIDE : Diagnosis Procedure


1. CHECK POWER SEAT SWITCH GROUND CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect power seat switch connector.
3.Check continuity between power seat switch connector and ground.





Is the inspection result normal?
YES-1:When power seat switch does not operate any components.-GO TO 2.
YES-2:When all power seat components do not operate.-GO TO 3.
NO- Repair or replace harness.

2. CHECK POWER SEAT SWITCH INTERNAL CIRCUIT

Check sliding switch.
Refer to "PASSENGER SIDE : Component Inspection" Component Inspection.
Is the inspection result normal?
YES- GO TO 3.
NO- Replace power seat switch. Refer to "Removal and Installation" Power Seat Switch.

3. CHECK INTERMITTENT INCIDENT

Check intermittent incident.
Refer to "Intermittent Incident" Intermittent Incident.
- INSPECTION END