Diagnosis Procedure

TRUNK LID AUTO CLOSURE SYSTEM DOES NOT OPERATE

OPEN FUNCTION : Diagnosis Procedure


1. CHECK STRIKER SWITCH

Check striker switch.
Refer to "Component Function Check" Striker Switch.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace the malfunctioning parts.

2. REPLACE TRUNK CLOSURE CONTROL UNIT

- Replace trunk closure control unit. Refer to "TRUNK LID STRIKER : Removal and Installation" Removal and Installation.
- Confirm the operation after replacement.
Is the result normal?
YES- INSPECTION END
NO- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.