Selective Unlock Function Does Not Operate

SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE

Diagnosis Procedure


1. CHECK "DOOR LOCK-UNLOCK SET" SETTING IN "WORK SUPPORT"

Check "DOOR LOCK-UNLOCK SET" setting in "WORK SUPPORT".
Refer to "DOOR LOCK : CONSULT Function (BCM DOOR LOCK)" CONSULT Function.
Is the inspection result normal?
YES- GO TO 2.
NO- Set "DOOR LOCK-UNLOCK SET" in "WORK SUPPORT".

2. CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?
YES- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.
NO- GO TO 1.