Disassembly and Assembly

CENTER CONSOLE ASSEMBLY

M/T MODELS : Disassembly and Assembly


CAUTION:
When disassembling, always use a remover tool that is made of plastic.

DISASSEMBLY

1.Remove center console assembly. Refer to "M/T MODELS : Removal and Installation" Removal and Installation.
2.Remove console lid fixing screws and remove console lid.
3.Remove console ashtray.
4.Remove console ashtray bracket fixing screw, and then remove console ashtray bracket.
5.Remove cup holder assembly fixing screws, and then remove cup holder assembly.
6.Remove USB connector (if equipped). Refer to "Removal and Installation" With Navigation.
7.Remove console power socket (if equipped). Refer to "CONSOLE POWER SOCKET : Removal and Installation" Removal and Installation.
8.Remove cigarette lighter (if equipped). Refer to "Removal and Installation" Removal and Installation.
9.Remove console sub harness.

ASSEMBLY

Assemble in the reverse order of disassembly.