Removal and Installation

TRUNK LID LOCK

TRUNK LID LOCK : Removal and Installation


REMOVAL

1.Remove trunk lid finisher. Refer to "Removal and Installation" Removal and Installation.
2.Remove trunk lid emergency opener lever.
3.Disconnect trunk lid opener cable.
4.Disconnect connector from trunk lid lock assembly.
5.Remove mounting bolts, and remove trunk lid lock assembly.

INSTALLATION

Install in the reverse order of removal.
NOTE:
- After installing, perform trunk lid fitting adjustment. Refer to "TRUNK LID ASSEMBLY : Adjustment" Trunk Lid Assembly.
- After installing, check the operation.