Work Procedure

CHECK ANTI-PINCH FUNCTION

Work Procedure


1. STEP 1

Fully open the door window.
- GO TO 2.

2. STEP 2

Place a piece of food near fully closed position.
- GO TO 3.

3. STEP 3

Close door glass completely with AUTO-UP.
- GO TO 4.

4. STEP 4

Check the following conditions
- Check that glass lowers for approximately 150 mm (5.9 in) without pinching piece of wood and stops.
- Check that glass does not rise not when operating the power window main switch while lowering.

CAUTION:
- Perform initial setting when auto-up operation or anti-pinch function does not operate normally.
- Check that AUTO-UP operates before inspection when system initialization is performed.
- Do not check with hands and other body parts because they may be pinched. Do not get pinched.
- It may switch to fail-safe mode if open/close operation is performed continuously without full close.
Perform initial setting in that situation. Work Procedure.
- END