Removal And Installation

IPDM E/R

Removal and Installation


CAUTION:
To prevent damage to the parts, IPDM E/R integrated relays cannot be removed.

REMOVAL

1.Disconnect the battery cable from the negative terminal.





2.Remove the cowl top cover (RH). Removal And Installation.
3.Pull up the IPDM E/R assembly while pressing the pawls (A) on the back of the IPDM E/R cover B (1).





4.Remove the IPDM E/R cover A while pressing the pawls (A) at the lower end of the IPDM E/R cover A (1).
5.Disconnect the harness connector and remove the IPDM E/R
(2).

INSTALLATION

Install in the reverse order of removal.