Work Procedure

SYSTEM INITIALIZATION

Work Procedure


1. STEP 1

1.Turn ignition switch ON.
2.Operate power window switch to fully open the window. (This operation is unnecessary if the window is already fully open)
- GO TO 2.

2. STEP 2

Continue pulling the power window switch UP (AUTO-UP operation). Even after glass stops at fully closed position, keep pulling the switch for 2 seconds or more.
- GO TO 3.

3. STEP 3

Check that auto-up function operates normally.
- GO TO 4.

4. STEP 4

Check anti-pinch function. Work Procedure.
- END