Part 2: Using the Vehicles on-Board Systems Diagnostic Menu

Part 2: Perform Multi AV initialization using the vehicles on-board Systems Diagnostic Menu.

NOTE:
^ The ignition should still be ON.

^ Leave C-III plus turned ON and the VI connected while performing Multi-AV initialization.

13. Turn the audio system OFF.





14. Put the AV system into System Diagnostic Mode SETTING as follows:

a. Press and hold the SETTING button.

b. While holding the SETTING button, turn the volume control knob 40 clicks or more.

^ The volume control knob can be turned either direction.





^ When the system goes into the System Diagnostic Menu, the screen in Figure 5 will display.

15. Select Confirmation/Adjustment





16. Select Initialize Settings

NOTE:
Use the scroll arrow to find Initialize Settings





17. Select Accessory Number Initialization





18. Select Yes





19. Select Yes





20. The screen in Figure 10 will display while initializing.





21. The screen in Figure 11 will display when initializing is complete.

22. Reboot the Multi AV system as follows:

a. Turn the ignition OFF.

b. Wait 10 Seconds.

c. Turn the ignition ON.