Headlamp

XENON HEADLAMP

Diagnosis Procedure


1. CHECK XENON BULB

Install the normal bulb to the applicable headlamp. Check that the lighting switch is turned ON.
Is the headlamp turned ON?
YES- Replace xenon bulb.
NO- GO TO 2.

2. CHECK INSIDE OF XENON HEADLAMP HOUSING

Check the inside of applicable headlamp (upper surface of HID control unit) for exist the water or trace of the water intrusion.
Are there trace of the water intrusion in the headlamp?
YES- GO TO 3.
NO- Check headlamp control system. If result is normal, replace front combination headlamp.

3. CHECK OUTSIDE OF XENON HEADLAMP HOUSING

Check the outside of applicable headlamp for cracks, serious damage or install the resin cap and the bulb socket securely.
Is the outside of headlamp housing abnormality?
YES- Replace the front combination lamp.
NO- Dry water fully and then check that the lighting switch is turned ON. Overhaul