Work Procedure

CONFIGURATION (HVAC)

Work Procedure


1. WRITING MODE SELECTION

CONSULT Configuration
Select "CONFIGURATION" of A/C auto amp.
When writing saved data-GO TO 2.
When writing manually-GO TO 3.

2. PERFORM "WRITE CONFIGURATION - CONFIG FILE"

CONSULT Configuration
Perform "WRITE CONFIGURATION - Config file".
- WORK END

3. PERFORM "WRITE CONFIGURATION - MANUAL SETTING"

CONSULT Configuration
1.Select "WRITE CONFIGURATION - Manual setting".
2.Select "SETTING".
3.Select "OK".
4.When "COMMAND FINISHED", select "END".
- GO TO 4.

4. OPERATION CHECK

Confirm that each function controlled by A/C auto amp. operates normally.
- WORK END